St Charles Siding Repair
 Call us: 630-687-9613
HomeSt Charles Siding Repair Siding Repair St Charles
Siding Repair St Charles ILContact UsCedar Siding Repair St Charles IL
Vinyl Siding Repair St Charles ILRoof Repair St Charles ILGutter Repair St Charles IL
Gutter Cleaning St Charles ILDownspout Repair St Charles ILRoof Vent Repair St Charles IL
Ice Dam Removal St Charles ILUnderground Drainage St Charles ILGutter Covers St Charles IL

Gutter Cleaning St Charles IL
Fall foliage is glorious on trees, but in your gutters, not so much. Tackle debris buildup with these tips. If climbing a ladder, be sure to use a stabilizer bar for safety and to prevent damaging the gutters. 

Start in the corners
Use a gloved hand to clear debris from tight spots, such as corners and downspouts. Toss debris in a bucket instead of onto the ground, where it can become a slipping hazard. slides into any hollow rung, keeping your bucket in place. 

Clear straight runs
A plastic scoop is an easy, inexpensive tool for removing leaves. Peel the label off a quart-size plastic milk jug or a 20-ounce soda bottle. Use a utility knife to slice off the bottom at an angle to make the scoop. 

Free connections
Usually, two elbows join the gutter to the downspout—a perfect place for clogs. A blast of water from a garden hose is often enough to clear them. For stubborn blockages, try a hand-crank plumber’s snake, then use the hose to flush out the downspout.Being a family-owned and operated business, we’re able to offer you that personal touch you’ve been looking for. Our goal is to make all of our customers happy. 

At St Charles Siding Repair, we really care about the products we sell, and we’d like to share our most important services and products with you. 

(SIDING REPAIR-GUTTER REPAIR-ROOF REPAIR-SOFFIT REPAIR.) 

We look forward to hearing from you soon!
St Charles Siding Repair ® 225 PRAIRE ST ST CHARLES IL 60174
 Call us: 630-687-9613
Siding Repair St Charles IL
Siding Repair St Charles IL
 Call us: 630-687-9613
 Call us: 630-687-9613
STEP 1

Remove Rotted Siding
First, remove any rotted clapboards, making sure to only remove the layers—or courses

Add a Comment | 0 Comments
STEP 2

Remove Vertical Caulk Joints
Use a utility knife to score any vertical caulk joints that exist between the end boards and siding. This will help limit the amount of paint touch ups you'll need to make to the end boards.

Add a Comment | 0 Comments
STEP 3
frame 5
frame 12
Untitled 2,433
Section Damage Clapboard
In cases where only a portion of a clapboard is damaged, use a speed square to mark a new joint (Image 1) and cut off the damaged portion with a circular saw (Image 2).

In this case, removal of the damaged boards revealed a section of the sill, beneath the clapboards, that had been damaged by termites (Image 3).

The termite-damaged area will have to be cut out entirely and replaced with a new section of wood. A custom-cut piece is made by joining together two pieces of pressure-treated lumber to achieve the proper dimension. The treated lumber is resistant to insect infestation. 

Add a Comment | 0 Comments
STEP 4
frame 1
Untitled 2,434
Remove Termite Damage
To restore the termite-damaged area, use a reciprocating saw to score the outline of the wood that needs to be removed (Image 1). Then, follow that outline with a circular saw and make vertical cuts with the reciprocating saw (Image 2). Finally, use a wood chisel and mallet to chisel out the damaged wood that remains. 

Add a Comment | 0 Comments
STEP 5
Untitled 2,435
frame 9
frame 29
Patch Siding Damage
With the length and width of the removed sill, cut two pieces of treated lumber that can be nailed together to achieve the thickness you need.

Place the replacement sill into the hole (Images 1 and 2), fitting it in tightly with a sledgehammer.

Nail it into the surrounding sill and to further solidify the patch, drill holes around the perimeter and fill each hole with epoxy (Image 3). This will help strengthen the delicate wood that surrounds the repair. 

Add a Comment | 0 Comments
STEP 6
frame 1
frame 14
Add New Siding
We used cedar siding to replace the rotted clapboards. First, to help avoid any future insect damage, back prime the cedar with oil based primer (Image 1).

Before the siding can go up, 1x4 starter strips of treated lumber should be nailed to the sill where the lower most course of siding will go up (Image 2).

Cut the cedar siding to the lengths needed using a miter saw and then nail it to the starter strips. Measure the depth to make sure it is consistent with the existing courses above. 

Add a Comment | 0 Comments
STEP 7
frame 1
frame 5
Untitled 2,438
Paint and Prime the Siding
After the first course of siding is up (Image 1), you can start adding the rest, slipping them under the courses above and nailing in place (Image 2).

Caulk the end joint and prime the front of each clapboard (Image 3).

Allow the primer to dry and you're ready for the final coat of paint. 
St Charles Siding Repair ® 225 PRAIRE ST ST CHARLES IL 60174
 Call us: 630-687-9613